150 User Rack mount Chassis...

IC-talk MM150r2

The MM150R has the added advantages of having a lockable removable hard-drive containing all system settings, a robust internal architecture, external USB based backup facility.

The system has been designed for a "headless" server room installation, with all management performed via a browser. Health reports from the system are automatically sent "back to base", quickly flagging any hardware issues with your system.

Up to 120 traditional phone-lines can be brought directly into the MM150R via dual ISDN30 cards (see below). The dual-port configuration allows for pass-through configuration allowing the MM150R to be "inserted" between an existing PBX system and the phone-lines, thus providing a phased implementation route.

Features Include:

• 150 x Extensions
• Unlimited Ring Groups
• 800 Hours of Recording time for voicemails and greetings
• 12 Months of Call Detail Logging (export to CSV available)
• 12 x Call Queues
• 8 x Multiway Conference Rooms (pin code protected)
• Choice of PSTN Interface (IP Only, 4 x ISDN2e, ISDN30e or Dual ISDN30e)
• Unlimited SIP trunks
• and loads more...
  

Versions Available

• IP Only 
• Quad ISDN2e - Basic Rate Euro ISDN
  (Euro ISDN (300 102) signalling, TE & NT mode operation)
• Single ISDN30 - Primary Rate Euro ISDN
  (PRI-NET & PRI-CPE, Euro ISDN, NI1&2, 4ESS (AT&T), 5ESS (Lucent) & DMS100)
• Dual ISDN30 - Primary Rate Euro ISDN
  (PRI-NET & PRI-CPE, Euro ISDN, NI1&2, 4ESS (AT&T), 5ESS (Lucent) & DMS100)

Hardware Specification

Power: 230V AC 50Hz. Max consumption 400W (average running consumption 80W, 1/2Amp). 2U high, 19" Rackmount enclosure front mounting brackets.

Interfaces: 4 x Telephony Card Slots for ISDN interfaces (BRI & PRI), 10/100Mb/s Ethernet RJ45 for LAN connection. USB2.0 for Flash Backup Pen.

Protocols: TCP/IP v4 (v6 ready), SIP (Session Initiation Protocol), H.323, IAX2, HTTP1.1 (for administration).

Compression Codecs: ADPCM, G.711 (A-Law & μ-Law), G.726, G.729 (optional extra), GSM, iLBC, Linear, LPC-10 & Speex.

Feature Overview

•  Multiple inbound phone lines (from multiple technologies including Analogue, ISDN2 and IP Trunks)
• IP Phone extensions
• Native SIP based and also legacy analogue (using a gateway)
• Call Hold, Transfer (blind or attended), Pickup, Park, Forwarding (on busy, no answer or unconditional)
• Multiple call queues with position and estimated hold time announcements
• Multiple call groups for extensions and external phone numbers for call distribution
• Voicemail per extension
• Accessible by phone, web or email
• Multi-level automated
• attendants for routing of calls more efficiently (i.e. press 1 for etc...)
• Multiple music on-hold tracks and categories using MP3's
• Call detail reporting
• Easy web interface for administration
• Web based Operators
• console
• Fax to email (ISDN30 versions)
• Up to 8 hours of recording for messages and announcements
• Advanced call routing using flexible call rules (route based on number called and person calling)
• Media Link—connect multiple managers together across multiple sites providing one large integrated phone system across multiple sites/locations
• Remote teleworker support with dynamic agent log-in
• Conference Server for larger multi-way conferences
• Interactive extension directory lookup service
• Support for e164 directory number lookups, so if a number has an Internet connection it will send the call direct for free.